FIGURE 13 REFLECTOR EXTENSIONS
Reflector extensions
may be installed one
side or both sides
1. Reflector extensions can be installed on
one side or both sides of the reflector
2. Reflector extensions are 116" in length
3. Holes (3) for "S" hooks are located 2.25"
from each end and one at the center (58")
4. Drill 1/4" holes in the reflector 3/4" up from
the bottom edge of the reflector to align
with the holes along the length of the re-
flector extension
5. Insert "S" hooks down from the top of the
reflector extension
6. Rotate "S" hook approx. 90°, and insert
into holes in reflector
7. Settle into place
(OPTIONAL - IF REQUIRED )
Insert 'S' hook
from top and
rotate
Page 15
GP-MSJV-BX-07A
STV-JZ Manual
RD: MAR 2009
RL: 07A - BA