Skyjack SJ 8831E Maintenance And Parts Manual page 9

Know and understand the safety precautions before going on to next section.
• DO NOT operate on surfaces not capable of
holding the weight of the aerial platform including
the rated load, e.g. covers, drains, and trenches.
• DO NOT operate an aerial plat-
form that has ladders, scaffold-
ing or other devices mounted
on it to increase its size or work
height. It is prohibited.
• DO NOT exert side forces on
aerial platform while elevated.
• DO NOT use the aerial platform
as a crane. It is prohibited.
• DO NOT sit, stand or climb on
the guardrails. It is prohibited.
• DO NOT climb on scissor arm
assembly. It is prohibited.
• BE AWARE of overhead ob-
structions or other possible
hazards around the aerial plat-
form when driving or lifting.
SJ800 - E Series
Battery Powered
Safety precautions (Continued)
•
•
•
•
•
•
•
•
•
•
Section 1 - About Your Aerial platform
DO NOT raise the aerial plat-
form while the machine is on a
truck, fork lift or other device or
vehicle.
BE AWARE of crushing haz-
ards. Keep all body parts in-
side platform guardrail.
DO NOT lower the platform
unless the area below is clear
of personnel and obstruc-
tions.
ENSURE that there are no personnel or obstruc-
tions in the path of travel, including blind spots.
BE AWARE of blind spots when operating the
aerial platform.
STUNT driving and horseplay are prohibited.
ENSURE All tires are in good condition and lug
nuts are properly tightened.
DO NOT alter or disable limit switches or other
safety devices.
DO NOT use the aerial platform without guard-
rails, locking pins and the entry gate/chain/bar in
place.
DO NOT exceed the rated capacity of the aerial
platform. Do make sure the load is evenly distrib-
uted on the platform.
SKYJACK, Page 5