Skyjack SJ 8831E Maintenance And Parts Manual page 80

Index Skyjack
No. Part No.
1 107639
105829
100141
2 130229
103632
3 117198
4 117199
5 (Ref.)
101632
103472
103999
111290
6 (Ref.)
103860
103995
104000
103980
7 117188
103856
104000
8 (Ref.)
103845
103404
100397
9 (Ref.)
10 (Ref.)
11 108366
12 111136
13 110425
14 (Ref.)
15 101954
16 100509
17 105807
18 106446
19 102237
SJ-800 Series E Battery Powered
119153
Figure 6.1-3. 4 Ft. Powered Extension Platform Assembly
Qty.
1 WELDMENT, Extension platform
2 • PIN, Roller 3/4" x 2-3/8" lg.
2 • ROLLER, Rear
1 PLATE, Info/warning mount
AR • BOLT, Self tapping 1/4" - 14 x 3/4" lg.
1 RAILING, Extension platform side LH
1 RAILING, Extension platform side RH
1 PLATE, Valve and panel mounting
- (For Components, Refer to Figures 6.1-7)
2 • BOLT, Hex-hd 3/8"-16 x 3/4" lg.
2 • WASHER, Flat 3/8"
2 • WASHER, Lock 3/8"
1 • BLOCK, Manifold
1 BOX ASSEMBLY, Powered ext. platform control
- (For Components, Refer to Figure 6.1-8)
2 • BOLT, Hex-hd 1/4"-20 x .75" lg.
2 • WASHER, Flat
2 • WASHER, Lock 1/4"
2 • NUT, Hex-hd 1/4"-20
1 PLATE, Control box mounting
4 • BOLT, Hex-hd 1/4"-20 x 3/4" lg.
6 • WASHER, Lock 1/4"
1 PANEL ASSEMBLY, Powered platform electrical
- (For Components, Refer to Figures 6.1-7)
2 • BOLT, Hex-hd 5/16"-18 x 1/2
2 • WASHER, Lock 5/16"
2 • NUT, Hex 5/16"-18
1 VALVE AND MANIFOLD ASSEMBLY
- (For Components, Refer to Figures 6.1-4 & 6.1-5)
1 CYLINDER ASSEMBLY, Powered extension platform
- (For Components, Refer to Figures 6.1-6 & 6.1-7)
1 WELDMENT, Cylinder front support
2 ROLLER, Extension platform
8 PAD, Deck slider 1" dia. x 11/32" thk.
1 WELDMENT, Main platform
- (For Components, Refer to Figure 6.1-1)
AR PAD, Slider 1-1/2" dia. x 3/8" thk.
AR PIN, Locking 3/8"
AR CABLE, Lanyard 6" lg.
1 RING, Retaining
2 PIN, Roller 3/4" x 3-11/32" lg.
NOTE: Quantities shown are for a single extension platform.
Parts list continued on the following page.
Description
SECTION 6, Page 11
AN