Kleenmaid CH805CE-1 Instructions For Use Manual page 13

Limited time of operation
172731_en.indd 13 172731_en.indd 13
Timer controlled period of operation for a particular
hotplate
• In this mode you are able to select the exact operation time
for any hotplate. After the time has elapsed the hotplate
automatically turns off. Time may be preset parallel for one
hotplate which must be switched on. First switch the timer
on by pressing the timer sensor. Next touch of the timer
sensor brings the decimal dot on the time indicator showing
which hotplate is being preset. If more than one hotplate is
in operation you may select the particular hotplate by several
consequent pressing on the timer sensor until your desired
hotplate is indicated with the decimal dot. Now set the desired
preset time by pressing the (+) or (-) sensor.
• Once the preset time has elapsed the selected hotplate is
automatically switched off, time indication fl ashes for a while
and the beep is heard. Power regulation display indicates "0"
and the remaining heat warning "H" appears.
• Other hotplates without the preset operation time continue with
normal operation.
This function is incorporated for safer operation of your hob.
Each hotplate is equipped with the time limit switch. The period
of operation is calculated in accordance with the last selected
power setting of a particular hotplate.
If the power setting is not changed for a while, the hotplate
will be switched off automatically after a certain period of time,
depending upon the power setting level (higher power setting
– shorter time - see chart).
Power setting
1
2
3
4
5
6
7
8
9
Maximum operation time in hrs
10
5
5
4
3
2
2
2
1
13
9.1.2007 14:52:04 9.1.2007 14:52:04