Ohp Transparencies - Ricoh Aficio SP C820DN Operating Instructions Manual

OHP transparencies

Printer setup
Printer driver setup
Supported paper feeding tray
Paper capacity
Duplex printing
Additional cautions
Letterhead
Printer setup
Printer driver setup
Supported paper feeding tray
Paper capacity
Select [Paper Input] [Paper Type: Bypass Tray]
[OHP (Transparency)].
Select [OHP Transparency] in [Paper type].
Bypass tray
Make sure paper is not stacked higher than the
paper guides inside the bypass tray.
Not supported
• When loading OHP transparencies, take care
not to load them upside down. Doing so may
cause a malfunction.
• It is recommended to place one sheet at a
time.
• Make sure to fan OHP transparencies every
time before printing. Leaving OHP
transparencies loaded in the paper tray may
cause them to stick together and result in a
misfeed.
• If multiple OHP transparencies are fed at the
same time, load them one by one.
• When printing on OHP transparencies,
remove the transparencies one by one as they
are output.
Select [Paper Input] [Paper Type: (tray name)]
[Letterhead].
Select [Letterhead] in [Paper type].
Any input tray can be used.
Make sure paper is not stacked higher than the
upper limit mark ( ) inside the tray. When using the
bypass tray, make sure paper is not stacked higher
than the paper guides inside it.
Paper Recommendations
111
5