Configuring Network Settings When Using Netware - Ricoh Aficio SP C820DN Operating Instructions Manual

4. Configuration

Configuring Network Settings When Using NetWare

If you use NetWare, select the appropriate NetWare frame type.
Select one of the items below as necessary.
• Auto Select
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
4
• Usually, you can use the default (Auto Select). When you first select [Auto Select], the frame type
detected by the printer is adopted. However, if your network can use more than two frame types, the
printer may fail to select the correct frame type with [Auto Select] selected. In this case, select the
preferred frame type.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Network], and then press the [OK] key.
84
BMW028S