Setting Items Of Wpa/Wpa2 - Ricoh Aficio SP C820DN Operating Instructions Manual

4. Configuration

Setting Items of WPA/WPA2

1. Start your Web browser.
2. Enter "http://(printer's address)/" in the address bar of a Web browser.
3. Enter your user name and password, and then click [Login].
For details about the login user name and password, consult your administrator.
4. Click [Configuration], and then click [Wireless LAN Settings] in the "Interface" area.
5. Select [Infrastructure Mode] in "Communication Mode".
6. Enter the alphanumeric characters (a-z, A-Z, or 0-9) in [SSID] according to the access point
you want to use.
4
7. Select [WPA] in "Security Method".
8. Select [TKIP] or [CCMP (AES)] in "WPA Encryption Method" according to the access point
you want to use.
9. Select [WPA] or [WPA2] in "WPA Authentication Method".
10. Click [OK].
11. Click [Logout].
12. Quit the Web browser.
• You can select [Certificate 1] or [Certificate 2] in the "Device Certificate" window. Note that if you
select [Certificate 1] in the "Device Certificate" window, you must select [Certificate 1] in the "IEEE
802.11a" drop down menu in the "Certification" window.
• If there is a problem with settings, you might not be able to communicate with the printer. To identify
the problem, print a network summary.
• If you cannot identify the problem, reset the printer interface to normal, and then repeat the procedure
from the beginning.
100