Emergency Procedures - Technoware EVO STAR 10 Installation And User Manual

Uninterruptible power supply
Table of Contents

Advertisement

If there is an emergency it is possible to disconnect the power supply charge by switching
off all the switches on the control panel. On the machines that are equipped you may press the
E.P.O. button.
PEOPLE HIT BY ELECTRICAL DISCHARGE
Ask immediately for the help of a qualified and trained person.
When a rather high voltage and high intensity electric hit a body current this can provoke
burns. The burns appear in and around the areas where the current enters and exits the body.
Even if only small burns are visible on the skin, the tissues beneath could be seriously
damaged. In any case, and however serious the burn may be, NEVER TOUCH the injured
person with bare hands until you are sure that the electricity has been cut off.
SYMPTOMS AND SIGNS
Redness, edema, skin burns or skins carbonisation in the areas where the electricity
entered and exited the body.
The person may loose consciousness.
The person may stop breathing or his/her heart may stop beating.
Shock symptoms.
FIRST AID
Cut off the power supply and move the injured person away from the source of contact. Call
immediately for an ambulance and, if necessary, for the help of a technician specialised in
electrical equipment.
EVO STAR 10-50
CAUTION!

EMERGENCY PROCEDURES

6
Tecnoware Power Systems

Advertisement

Table of Contents
loading

Table of Contents