Table of Contents
Advertisement
Tecnoware Power Systems
6 CHECK TOOLS
The user can communicate with the U.P.S. in the following ways:
1. Using the control panel on the front of the control board
2. Using relay interface
3. Using a Personal Computer connected to the U.P.S.
4. Using the remote control panel (Optional)
You can connect all these check tools described above to the same machine without creating
interference or incompatibility among the components. The use of photocouplers on all
interfaces (except for relay interface) guarantees galvanic separation of the interfaces remote
controlled from the U.P.S. assuring all connected equipment total protection from disturbance
and interference.
6.1 THE CONTROL PANEL AND ITS FUNCTIONS
Picture 17
EVO STAR 10-50
29
Advertisement
Table of Contents
