Table of Contents
Advertisement
6.1.2
DIAGNOSTIC TOOLS
The diagnostic tools allow checking the U.P.S. functioning state, by checking for the presence
of alarms in progress or already activated and Battery State.
The available diagnostic tools are:
1. Event menu
2. History menu
3. Battery test
6.1.2.1 EVENT AND HISTORY MENUS
The "EVENT" menu allows viewing of all the alarms in progress, whereas the "HISTORICAL"
menu allows viewing alarms which were active but which have already been restored. They are
used when the alarm of the machine goes off to locate the origin and the cause of the alarm
and also to establish how serious the problem is. Both have an error code and a short
message. The historical menu also shows the date and the time the alarm went off.
1. The "error code" is the code which identifies the type of error shown by the system
2. The " display message" shows the message that can be seen in the "EVENT" or
"HISTORICAL" menu, that is, a brief explanation of the reason for the alarm
3. The "seriousness" defines how serious the problem is:
Anomaly: If the alarm is caused by a temporary event
User: If incorrect or intentional manoeuvring by the user causes the alarm
Failure: If the alarm is caused by a system failure that can be restored only by the user
EVO STAR 10-50
32
Tecnoware Power Systems
Advertisement
Table of Contents
