Table of Contents
Advertisement
When the power supply is not in the set parameters, the equipment maintains output
voltage by taking power from the batteries (Picture 7). The system is provided with a current
control that keeps the current inside set parameters in the event of current overloaded.
3.3 PART LAYOUT
It is important to be familiar with the parts that are necessary during the
connection procedures before connecting the equipment. In order to access the
parts which will be described you must remove the "second access", which is
the metal panel used to protect the inside parts of the U.P.S. and also to
protect the user from accidental contacts with live parts.
Picture 8
EVO STAR 10-50
Picture 7
KEY
A = Display board
B = Relay board
C = Interface connector
D = Terminal
E = Breakers
F = Fuse cards
= Earthing
14
Tecnoware Power Systems
Advertisement
Table of Contents
