Setup Diagram - ACN IRIS 3000 Quick Start Manual

1.
modem and your computer.
1.
your Videophone.
2. Connect one end of the Ethernet cable to the WAN port of your Videophone.
Connect the other end to an open Ethernet port on your router.
3. Ensure that your computer is connected to another port on your router or via an
4. Connect the Power Adapter to the Power port and then plug it into an electrical
outlet. Note: Do not use power adapters from other devices.
Turn the Power Switch to ON on your Videophone. You will see a status line
on your screen as your phone goes through setup. Once this is complete, the
register light on the front of your phone will turn green, and your Videophone is
ready for use.
Set-up Diagram
5