Setup Diagram - ACN IRIS 3000 Quick Start Manual

1. Installation with Router (requires Router with free port)
Follow these instructions if you have a router connected between your
modem and your computer.
1. Connect the handset to the connection point located on the side of
your Videophone.
2. Connect one end of the Ethernet cable to the WAN port of your Videophone.
Connect the other end to an open Ethernet port on your router.
3. Ensure that your computer is connected to another port on your router or via
an existing Wireless (WIFI) connection.
4. Connect the Power Adapter to the Power port and then plug it into an electrical
outlet. Note: Do not use power adapters from other devices.
5. Turn the Power Switch on your Videophone to ON. You will see a status line
on your screen as your phone goes through setup. Once this is complete, the
register light on the front of your phone will turn green, and your Videophone
is ready for use.
Note: Simultaneous use of the computer and the Videophone will affect the quality of
the connection.
Set-up Diagram
Cable or DSL Modem
Computer
3
2
Router
1
Videophone
5