ACN IRIS 3000 Quick Start Manual page 6

2.
1.
your Videophone.
2.
your computer to the WAN port of your Videophone.
3. Connect one end of the new Ethernet cable that came with your Videophone,
to the LAN port of the phone. Connect the other end to the Ethernet port of
your computer.
4. Connect the Power Adapter to the power port and then plug it into an electrical
outlet. Note: Do not use power adapters from other devices.
Turn the Power Switch to ON on your Videophone. You will see a status line
on your screen as your phone goes through setup. Once this is complete, the
register light on the front of your phone will turn green, and your Videophone is
ready for use.
Set-up Diagram
6