3.3.3 Event Servers
Event servers are to be used with event trigger actions. In case of unusual
motion detected by the camera or a disk failure, the recorder can send
notification with the acceptable format (image/txt) to a destined event server
according to the configuration.
Configuring an FTP server
To add an FTP server,
1. Start by giving a name to the server that you are adding to the recorder
2. Enter the hostname or the IP address of the FTP server
3. Enter the communication port of the FTP server (usually port 21)
Need help?
Do you have a question about the NR-1604 and is the answer not in the manual?