Advertisement
3.1.5 Disk Setup
Once you install a hard disk to the recorder, you would need to initialize it so
that it can be ready for recording. You can obtain basic information about the
disk you installed in this page
To initialize it, simply click the "Format" button
You can also connect external USB thumb drive to the recorder for
firmware upgrade.
For instructions to install a hard disk to the recorder, refer to page 9
To obtain detail information about the disk, go to "System Options" >> "Disk
Status"
Advertisement
Need help?
Do you have a question about the NR-1604 and is the answer not in the manual?