Brickcom NR-1604 User Manual page 19

Access NR-1604 with its default IP address
The NR-1604 comes with a preconfigured static IP "192.168.101.50". However, it is
only used when there is no DHCP server presented in the network. The NR-1604 will
turn on its DHCP server function and act as the DHCP server in the network. To
connect to the NR-1604, use a PC that is on the same network over a switch or hub,
or connect the PC directly to the NR-1604 using a crossover CAT5 Ethernet cable.
The PC that is connected directly to the NR-1604 (or within the same local area
network) should receive an IP from it. Simply access the NR-1604 from your web
browser with its IP address.
Again, you should be prompted for the username and password. Enter its default
username "admin" and password "admin" and then click"OK" to enter the system.