Advertisement
2. After that, the search should begin and its status should be displayed:
3. Found cameras should be listed and simply select a camera from
the list and press "Configure"
4. Its corresponding information should be displayed in the "Camera Information"
section. Enter its username and password and select the channel ID and name
the camera.
5. Click on "Detect" to establish connection between the recorder and the
camera. If connection establishes successfully, camera's detailed information
should be polled and displayed as below
6. Adjust its video format, frame rate, resolution or bitrate...etc if you wish. You
can also click on the "Preview" to preview the live video of the camera.
Click "Add" to finish adding the camera
46
Advertisement
Need help?
Do you have a question about the NR-1604 and is the answer not in the manual?