Brickcom NR-1604 User Manual page 55

3.3 Event Configurations
The "Event Configurations" section allows users to define conditions that
constitute an event, its corresponding trigger action and when it will be
triggered. Such setting can reduce the management overhead and notify the
administrator only when it's necessary.
3.3.1 General Settings
The general settings section can help you quickly configure when an event is
triggered, how often events are triggered and the corresponding actions when
events are triggered.
Start the event configuration by defining the general settings:
Define when an event will be triggered
• Choose "Always" or "Only during..." under "Event Trigger Duration"
• For the "Only during..." option, choose the days by using the check box and then
define the time range in those days in the "Start Time" and "End Time" fields that
you would like the event trigger function to be enabled.
How often an event is triggered
• Set a time interval under "Event Trigger Interval" to define how
often events are triggered