Brickcom NR-1604 User Manual page 15

Connect to the NR-1604
There are various ways you can connect to the NR-1604 and below are the
suggested methods for different network setup:
• The NR-1604 is placed in a network with a DHCP server: Connect to the
NR-1604 by using "Setup Wizard" Utility.
• The NR-1604 is placed in a network without DHCP server (or you are
connecting to it directly): Access NR-1604 with its default IP.
Use Setup Wizard Utility
If the NR-1604 is placed in a corporate network or a local area network where a
DHCP server is already presented, install the "Setup Wizard" utility on the CD from a
computer that is on the same network and locate the NR-1604 with its IP address
that is assigned by the top-level DHCP server.