Advertisement
3.2.4 PTZ Preset Sequence
Once you have multiple preset points defined for a camera, it is convenient for
monitoring to set up the sequencing viewing among those preset point and let the
recorder automatically switch between them for you.
To configure preset sequence for a camera," select a camera from the
"Camera" drop-down menu
The available preset points should be listed in "Camera Presets" section
Pick the ones you like for sequence viewing and press the "->" button to move
them to the "Adjust Position" section, then use the up and down buttons to adjust
their sequences
Finally, select a dwell time from the drop-down menu and click "Apply " to save
the configuration
•
To start preset sequence viewing, check page 20 for instructions
50
Advertisement
Need help?
Do you have a question about the NR-1604 and is the answer not in the manual?