Haier proline IDW12P-E Servise Manual page 12

Service Manual
Issue
Model No:IDW12P-E/IDW12P-U
Rev.
Adjustable softener with reed disassembly
Lay the dishwasher on the floor, then remove the bottom
cover, pull out the connector of the salt adding valve and
the low salt switch.
Remove the three clips for fixing the rubber connect pipe,
then pull out the rubber pipe.
Open the out door, you can see the salt adding cover,
then circumrotate the cover anticlockwise and screw it
Circumrotate the fixing set of the water softer
anticlockwise, then screw id down(you can use the
disassembly tool to operate)
Then take the water softer down accordingly.
11