4.8.1 PNP OS Installed
Select "Yes" if you are using a plug and play capable operating
system. Select "No" if you need the BIOS to configure non-boot
device.
4.8.2 Reset Configuration Data
Default is Disable. Select Enable to reset Extended System
Configuration Data (ESCD) if you have installed a new add-on and
system configuration has caused such a conflict that OS cann't boot.
4.8.3 Resources controlled by
The commands here are "Auto" or "Manual". Choosing "manual"
requires you to choose resources from each following sub-menu.
"Auto" automatically configures all of boot and Plug and Play devices
but you must be using Windows95 or above.
4.8.4 PCI/VGA Palette Snoop
This is left at "Disabled".
4.9 PC Health Status
24
JetBox 8100 User Manual_HW_1.00