Figure 3-1 Jumper 2 Setting
3.4 Install the DDR SDRAM Memory Module
The JetBox 8100 provides one 200-pin SODIMM (Small Outline Dual Inline
Memory Module) socket and supports 2.5V DDR SDRAM. You can install
from 128MB to 512MB of DDR SDRAM memory.
The procedure of installing a DDR SDRAM SODIMM into the JetBox 8100
is detailed below, please follow these steps carefully.
1. Remove the power cord.
2. Unscrew the screws from the bottom cover of the Jetbox 8100
3. Remove the bottom cover and extension board from main board.
4. Plug a DDR SDRAM SODIMM into a DDR SODIMM socket on board.
5. Inserting extension board and screw back the bottom cover with
screws.
JetBox 8100 User Manual_HW_1.00
12