2.10 Power ON/OFF Button
Plugging a DC power into a power connector then switch power to on,
when you final installed system hardware device.
ON
OFF: Power Off
2.11 Reset Button
The JetBox 8100 has a push button switcher for system reset. Push and
release the button will cause hardware reset of JetBox 8100 and restart
system booting.
2.12 LED Indicators
The Power and HDD LED's has two distinctive statuses: Off for inactive
operation and blinking light for activity. And the 2 LEDS's for LAN ports.
The right side LED's (Green) indicate on-line, and left side LED(Orange)
access status of LAN.
ACT
PWR
JetBox 8100 User Manual_HW_1.00
OFF
Figure 2-9 Power ON/OFF Button
LINK
HDD
Figure 2-10 LED Indicators
ON
OFF
ON: Power On
ACT : LAN Access LED (Orange)
LINK: :LAN Link LED (Green)
PWR: Power LED (Green)
HDD: HDD LED (Red)
9