First/Second/Third/Boot Other Device; Boot Up Numlock Status; Gate A20 Option; Typematic Rate (Chars/Sec) - Korenix JetBox 8100 User Manual

skips some of the items during the test. When disabled, the computer
conducts normal POST procedures.

4.4.4 First/Second/Third/Boot Other Device

The BIOS tries to load the OS with the devices in the sequence
selected. Choices are:Floopy, LS120, HDD, SCSI, CDROM,USB,
LAN, Disabled.

4.4.5 Boot Up Numlock Status

This feature selects the "power on" state for Numlock. The
commands are "Enabled" or "Disabled".

4.4.6 Gate A20 Option

Normal: A pin in keyboard controller controls GateA20
Fast(Default):Chipset controls GateA20
The typematic rate is the rate key strokes repeat as determined by
the keyboard controller. The commands are "Enabled" or "Disabled".
Enabling allows the typematic rate and delay to be selected.

4.4.7 Typematic Rate (Chars/Sec)

BIOS accepts the following input values (Characters/second) for
typematic rate:6,8,10,12,15,20,24,30.

4.4.8 Typematic Delay(Msec)

Typematic delay is the time interval between the appearance of two
consecutive characters, when holdling down a key. The input values
for this category are: 250, 500, 750, 1000(msec)

4.4.9 Security Option

This field allows you to limit access to the System and Setup. The
default value is Setup. When you select System, the system prompts
for the User Password every time you boot up. When you select
JetBox 8100 User Manual_HW_1.00
19