Com2 Rs232/422/485 Jumper Setting (Jp2) - Korenix JetBox 8100 User Manual

The jumper settings are schematically depicted in this manual as follows:
A pair of needle-nose pliers may be helpful when working with jumpers. If
you have any doubt about the best hardware configuration for your
application, contact your local distributor or sales representative before you
make any changes.

3.3 COM2 RS232/422/485 Jumper Setting (JP2)

The COM 2 port located on front metal face plate of Jetbox 8100 unit which
can be configured to operation in RS232, RS422 or RS485 mode by use
BIOS setting or setting up the Jumper Pins of JP2 located on internal board
of Jetbox 8100 unit.
JetBox 8100 User Manual_HW_1.00
11