2.4 Hardware setup procedure
Power off your PC, remember to unplug the AC power cable
Insert B100E into a PCI-E slot vertically
Plug ISDN lines into RJ-45 interfaces which set as TE mode and
ISDN phone lines into RJ-45 interface which set as NT mode
Fix the board by a screw
Power on PC
is needed. Once power is on, you must not attempt to install or take down
the board. After hardware setup appropriately, it is time to install
software.
OpenVox Communication Co. LTD.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Caution: If need to connect ISDN phone to B100E which
set to NT mode, the phone must have the power supply
function. During the above processes, an ESD wrist strap
B100E on DAHDI User Manual
URL: www.openvox.cn
12