OpenVox B100E on DAHDI User Manual page 19

that nothing to do, which means you could go to next one directly.
Otherwise, the system will keep on installing it.
Change to the directory dahdi-linux-complete-XX (XX represents
DAHDI version), then perform commands one by one to install DAHDI.
# cd /usr/src/dahdi-linux-complete-2.3.0.1+2.3.0
# make
# make install
# make config
save your changes and exit. Then run "make" again, if successfully done,
it is time for you to install Libpri and Asterisk.
OpenVox Communication Co. LTD.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
If there is no kernel source in the system, you should also
install it by running like:
# yum install kernel-devel
If the dependency has been installed, system will indicate
Caution: If there is something wrong after "make",
please refer to HERE. In the url link, the moderator
introduces you a method how to patch. After patching,
B100E on DAHDI User Manual
URL: www.openvox.cn
18