OpenVox B100E on DAHDI User Manual page 23

# Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] " (MASTER)
span=1,1,0,ccs,ami
# termtype: te
bchan=1-2
hardhdlc=3
echocanceller=mg2,1-2
# Global data
loadzone
defaultzone
2. Country mode modification
In order to match your country mode, it is need to change parameters
loadzone and defaultzone to your country. For example, your system is in
CHINA, you would like them change to:
loadzone = cn
defaultzone = cn
/etc/asterisk/indications.conf.
country=cn
A part of file /etc/asterisk/dahdi-channels.conf is showed as below.
(Modification, if it is not agree with the hardware setup)
OpenVox Communication Co. LTD.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
= us
= us
Figure 5 A part of system.conf
Some zonedata is available in the file
.. /dahdi-XX/tools/zonedata.c, you can refer to it to
match your country mode. Meanwhile, you also need to
modify another parameter which is in file
B100E on DAHDI User Manual
URL: www.openvox.cn
22