Splitter; Hardware Setup Procedure - OpenVox A1200P User Manual

modules correspond to FXS ports which provides power (battery) and
generates ring signals.

2.5 Splitter

A RJ45 interface of A1200P is divided into four RJ11 ports by a specific
splitter as the picture of Appendix B stated. So you should prepare for
some splitters when install A1200P.

2.6 Hardware setup procedure

 Power off your PC, remember unplug the AC power cable
 Insert A1200P into a 3.3V or 5.0V PCI slot vertically
 Put timing cable appropriately if nesessary
 Please plug PSTN lines into FXO ports and extension telephone lines
into FXS ports
 Fix the board by a screw
 Power on PC
 After power on, three rows in total 12 LEDs of the board left will be
light which reflect channels' status, one LED corresponds to a
module.
OpenVox Communication Co. LTD.
A1200P on DAHDI User Manual
URL: www.openvox.cn
12