OpenVox B100E on DAHDI User Manual page 16

# vim ../tools/modules.sample
Add "zaphfc" in the file "modules.sample" like that:
# Digium TDM400P: up to 4 analog ports
wctdm
# Openvox B100P: 1 NT/TE BRI ports
zaphfc
# Digium B400P: 4 NT/TE BRI ports
wcb4xxp
 If using Asterisk 1.8, it is not need to make any patches more.
 If using Asterisk 1.6, please modify the file
asterisk-1.6.xx/channels/chan_dahdi.c as the following introduction.
Please comment out the following line:
/*ast_log(LOG_WARNING, "How cool would it be if someone Implemented
this mode!For now, sucks for you.(line %d)\n", v->lineno);*/
Then add the following two lines after the above action:
confp->chan.sig = SIG_BRI_PTMP;
Confp->pri.nodetype = PRI_NETWORK;
OpenVox Communication Co. LTD.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
;must add this line
B100E on DAHDI User Manual
URL: www.openvox.cn
15