OpenVox B100E on DAHDI User Manual page 24

; Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] " (MASTER)
group=0,11
context=from-isdn
overlapdial=yes
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63
3. Asterisk initiation
Execute a command to start Asterisk:
# asterisk -vvvvvvgc
If Asterisk is already activate, run "asterisk –r" instead.
In the CLI, please run the following commands
"dahdi show channels" and "pri show spans":
*CLI> dahdi show channels
Chan Extension
pseudo
1
2
*CLI>
*CLI> pri show spans
PRI span 1/0: Provisioned, Up, Active
*CLI>
If you can see the span is up and active status, it means successful
installation. Otherwise, please check the setting files and physical
OpenVox Communication Co. LTD.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
# must add this line
Figure 6 A part of dahdi-channels.conf
Context Language
default default
fRom-isdn default
fRom-isdn default
Figure 7 channels and spans show
B100E on DAHDI User Manual
MOH Interpret Blocked
URL: www.openvox.cn
State
In Service
In Service
In Service
23