Table of Contents
Advertisement
Chapter 2 Hardware Setup
There are some points that should be paid attention to when setting up
D110P/D110E.
2.1 Span type setup
The jumper P5 on the middle of right side controls the function of each
span at E1 or T1 mode. Setting P5 to close means SPAN1 will work at E1
mode. Setting P5 to open means SPAN1 will be T1.
2.2 Slot compatibility
D110P is compatible with 32-bit 5.0V PCI slot, 64-bit 3.3V PCI slot or
64-bit 5.0V PCI slot, but D110E is compatible with PCI-E ×1, ×2, ×4, × 8,
or × 16 slot. You should confirm your slot type and insert D110P into a
PCI slot or put D110E into a PCI-E slot as previously described.
1
2
3
4
OpenVox Communication Co. LTD.
http://ArtTel.ru
D110P/D110E on DAHDI User Manual
Figure 2 PCI-E and PCI slot
×
PCI-E
1 slot
32-bit 5.0V PCI slot
64-bit 3.3V PCI slot
64-bit 5.0V PCI slot
8
URL: www.openvox.cn
Advertisement
Table of Contents
