If the method of print is set to EXTERNAL PRINTER, please refer
to Printing with External Printer below.
To change the method of print please refer to Setting the
Print Destination below.
Press
to return to the REGISTERS screen.
To return to Supervisor screen press
14.7.3 Setting the Report Destination
From the SETUP screen select REPORT ON and press
confirm, the following screen will be observed:
REPORT ON
ESC
Using the
move the cursor to make a selection and press
Or, to return to the SETUP screen with the print destination
unchanged press
14.7.4 Printing with External Printer
Before proceeding to print registers using an external printer
ensure that the printer lead is connected to the Upper Accessory
Port at the back of the machine, (please refer to "Controls and
Features") and that the printer power lead is connected to an
adjacent power outlet.
1
LABELS
2
EXTERNAL PRINTER
and
keys, or the appropriate number key,
.
twice.
OK
to confirm.
Supervisor settings
to
81