Machine Description; Machine Parts; Technical Data - ECM Technika Instruction Manual

2.2 Proper use
The TECHNIKA/ TECHNIKA PROFI has to be used only for the preparation of coffee, hot water and steam. The
machine is not intended for commercial use.
Every use of the machine other than the above mentioned purpose is strictly forbidden. The manufacturer cannot be
held responsible for damages due to unsuitable use of the machine and is not liable to recourse.
This appliance is intended to be used in household and similar applications such as:
staff kitchen areas in shops, offices and other working environments
farm houses
by clients in hotels, motels and other residential type environments
bed and breakfast type environments
3

MACHINE DESCRIPTION

3.1 Machine parts

1
2
3
4
5
6
7
8
9
The TECHNIKA and the TECHNIKA PROFI differ in
their valve types. The TECHNIKA has rotary valves,
whereas the TECHNIKA PROFI has lever valves (see
photo on the right side).
Caution!
Danger of injury: The following parts are hot or can become hot:
area around the steam handle and the hot water handle (TECHNIKA) or the steam and hot water
lever valves (TECHNIKA PROFI)
steam and hot water tube
filter holder
brewing group
body (upper part and side frames)

3.2 Technical data

Voltages: EU: 230 V
UK: 230 V
New Zealand: 230 V
Instruction manual TECHNIKA · TECHNIKA PROFI
1 Cup heater (cover flap)
2 Fresh water tank (under the cup heater)*
3 Assembled steam dispenser
4 Boiler pressure gauge
14
5 Brewing group
6 Filter holder spout
7 Green control lamp
13
8 Power switch
9 Orange control lamp
12
10 Drip tray
11 Filter holder
12 Group lever
11
13 Pump pressure gauge
14 Assembled hot water dispenser
10
* This component is not included in water connection models.
19
ENGLISH