Table of Contents
Advertisement
19)
Install socket and bulb into light diffuser as shown below.
20)
Secure socket to light diffuser with one screw - as shown below.
21) Repeat steps 12-20 to install 2nd light diffuser .
22) Plug light assembly into receptacle located in the lower left corner
inside the unit, attach ground wire to ground lug - located forward of
the receptacle.
Ground
23) Reconnect electrical supply - test lights.
24) Reverse steps 8 -2.
BULB REPLACEMENT
1) Slide out bottom faceplate panel - see step 3 from previous page.
2) Remove 4 screws securing light diffuser mounting plate.
HZ42E Regency Horizon™ Gas Fireplace
3) Pull out light diffuser.
4) Remove one screw securing the socket end of the diffuser and
separate the 2 parts - as shown below.
Receptacle
5) Replace bulb.
Note: Oils from hands will shorten the life of the bulbs,
do not handle bulbs with bare hands.
6) Reverse steps 3 through 1..
INSTALLATION
43
Advertisement
Table of Contents
