Bellfires Derby Installation Instructions And Instructions For Use page 12

Bellfi res
2.5 REMOTE CONTROL
2.5 REMOTE CONTROL
2.5.1 General
The appliance is opperated by radio remote control. This comprises a hand-held
transmitter and a receiver. The receiver is part of the gas control block assembly.
The receiver and the gas control block are behind the (white) panel door (operating unit)
next to the appliance. Press the door inwards to open; this will release the catch and the
door will spring out.
or:
The receiver and the gas control block are behind the operating fl ap at the bottom of the
appliance. Pull the fl ap forward to open.
The hand-held transmitter and receiver are powered by batteries.
Hand-held transmitter : 1x 9V battery.
Receiver
Note: Hand-held transmitter and receiver are not interchangeable with previous models.
2.5.2 Hand-held transmitter
The remote control works by radio signal. The hand-held transmitter is confi gured in the
factory with a unique signal code.
Instructions for use and installation instructions
: 4x 1.5V battery type LR6 or AA.
Option: 6V adapter (230 VAC). Available from your fi tter.
English
12