No Movement" Auto Arming; Fire Alarms - Paradox 1640 User Manual

A 60-second Exit Delay (see page 7) will start before the
system arms. Auto-Arming can be cancelled by entering
your access code.

3.12 "No Movement" Auto Arming

Your panel can be programmed to arm the system and/or
send a report if no zone activity occurs for a pre-programmed
amount of time. This is useful when supervising an individual
with chronic health problems or who lives alone.

3.13 Fire Alarms

Upon a fire alarm, the bell/siren will emit three "squawks" at 2
second intervals until silenced or reset by entering a valid
access code. If the zone is a Delayed Fire Zone, there is a
delay before the system contacts the monitoring station. This
will prevent unnecessary reporting of false alarms. If there is
no fire condition, contact your monitoring station immediately
to avoid an unnecessary response.
What Do I Do if a Delayed Fire Zone Was Activated?
1. Press the
2. Try to correct the problem.
3. If the problem persists, the alarm will sound again. Press
the key again.
This instructs the system to delay reporting the fire alarm to
the monitoring station (see Figure 3.1 on page 16).
key within 30 seconds of the alarm.
1640 Icon LCD Keypad 15