KTD-N0838-0
2 System Specification
2.1 Component main data
The table below summarizes the features of the KTHM65/mITX embedded motherboard.
Form factor
KTHM65/mITX: miniITX (170,18 mm by 170,18 mm)
Processor
Support the following 2nd Generation Intel® Core™ (Sandy Bridge M) and Intel®
Celeron® processors via Socket G2 (rPGA 988B ) ZIF Socket
•
Intel® Core™ i7
•
Intel® Core™ i5
•
Intel® Core™ i3
•
Intel® Celeron® B810
Up to 1333MHz system bus and 2/3/4/6MB internal cache.
•
Memory
DDR3 SODIMM 204pin socket (2 sockets)
•
Support single and dual ranks DDR3 1066/1333/1600MT/s
(PC3-8500/PC3-10600/PC3-12800)
•
Support system memory from 256MB and up to 4x 8GB (2x 8GB on mITX).
Note: Less than 4GB displayed in System Properties using 32bit OS
(Shared Video Memory/PCI resources is subtracted)
•
ECC not supported (PGA processors do not support ECC)
Chipset
Intel HM65 PCH (Platform Controller Hub)
•
Intel ® AT (Anti-Theft Technology)
•
Intel ® HD Audio Technology
•
Intel ® RST (Rapid Storage Technology) (AHCI only, not RAID)
•
SATA (Serial ATA) 6Gb/s and 3Gb/s.
•
USB revision 2.0
•
PCI Express revision 2.0
•
ACPI 3.0b compliant
•
Dual Display support (Dual Graphic Pipes)
•
Blue-ray HD video playback
•
Security
Intel® Integrated TPM 1.2 support
Audio
Audio, 7.1 Channel High Definition Audio Codec using the VIA 1708B codec
•
Line-out
•
Line-in
•
Surround output: SIDE, LFE, CEN, BACK and FRONT
•
Microphone: MIC1 and MIC2
•
CDROM in
•
SPDIF (electrical Interface only)
•
On-board speaker (Electromagnetic Sound Generator like Hycom HY-05LF)
Page 10
System Specification
KTHM65 Users Guide