2.1 Presetting the Values
2.1 PRESETTING THE VALUES
Selecting the PLU No.
1
When the power is turned OFF,
press the ON/OFF key, then the self-diagnosis display appears.
2
Immediately press the SET key while all display segments are lit.
PLU 1 will be displayed.
3
Repeat to press either the ZERO (+) or TARE (-) key until the desired PLU No. appears on
the display.
[Example] Selecting PLU 2
or
page 10
IGX Series
IGX Series
IGX Series
IGX Series
IGX/IGB Series Operation Manual No. 0202A
IGB Series
IGB Series
IGB Series
IGB Series