Handset Operating Guide - McQuay MWM Service Manual Book

Handset Operating Guide

G6
Outlook
Operation Guide
1. "ON/OFF" Switch
Press to start the air conditioner unit.
Press again to stop the unit.
2. Temperature Setting
Set the desire room temperature.
Press button to increase or decrease the set temperature. Setting range are between 16°C TO 30°C
setting (60°F to 80°F) (Optional setting from 20°C to 30°C).
Press or button simultaneously will toggle the temperature setting between °C and °F.
3. Automatic Air Swing
Press the button to activate the automatic air swing function. The swing angle ranging from horizontal
to 25 to bottom.
4. "SLEEP" MODE
Press the button to activate sleep mode. This mode can only be activated while in cooling or heating
mode operation. If it is activated in "COOL" mode, the set temperature will be increase 0.5°C after 30
minutes, 1°C after 1 hour and 2°C after 2 hours. Whereas in "HEAT" mode, the set temperature will
decrease by 1°C after 30mins, 2°C after 1 hour and 3°C after 2 hours.
This function is available under COOL, HEAT & AUTO mode.
7
MODE
6
TIMER
5
SLEEP
4
SWING
3
8
TEMP
FAN
2
1
11