Netware 3 - McQuay MWM Service Manual Book

Netware 3

Outlook
4
3
2
1
Operating Guide
1. "ON/OFF" Switch
• Press once to start the air conditioning unit.
• Press again to stop the unit.
• The operation lamp next to the key lights up and goes off respectively when the unit is
running or not running.
• Caution : In the case when the ON/OFF key is pressed immediately after the operation is
stopped, the unit will not restart until 3 minutes later to protect the compressor.
2. Selecting Operating Mode
• Press the MODE key to select the type of operating mode. Consecutive press of the key
switches the operation over "COOL", "HEAT", "AUTO", "DRY" and "FAN"
3. Fan Speed Selection
• Press the FAN key until the desired fan speed is achieved.
5
6
7
8
1. Time display
2. Key lock display
3. Error indication
4. Fan speed display
5. Operation mode display
6. Sleep mode display
7. Air swing display
8. Temperature set display
23