McQuay MWM Service Manual Book page 17

4. Fan speed selection
Press the D button continuously will toggle the fan speed in the following order: Low (
Med ( ) –––: High (
Stop pressing when the desired fan speed appears on the display screen.
5. ON Timer Setting
Press the SET button will activate the on timer function.
Set the desired on time by pressing the SET button continuously. If the timer is set to 7.30am, the
air conditioner will turn on at 7.30am sharp.
Press the CLR button to cancel the on timer setting.
6. OFF Timer Setting
Press the SET button will activate the off timer function.
Set the desired off time by pressing the SET button continuously.
Press the CLR button to cancel the off timer setting.
7. Automatic Air Swing
Press the SWING (
To distribute the air to a specific direction, press the SWING button and wait until the louver move
to the desired direction and press the button once again.
8. Sleep Mode Setting
Press the SLEEP button will activate the sleep mode function. This function is available under
COOL, HEAT and AUTO mode.
When the unit is operating under cooling mode, the set temperature is increased by 0.5°C after 30
minutes, 1°C after an hour, and 2°C after 2 hours.
When the unit is operating under heating mode, the set temperature is decreased by 1°C after 30
minutes, 2°C after an hour and 3°C after 2 hours.
9. Clock Time Setting
Press + button to increase the clock time.
Press – button to decrease the clock time.
10. Turbo Mode
Press the TURBO (
11. Ionizer
Press the button to activate the negative Ion function, which will refresh the indoor air effectively.
12. Personalize Setting
J
Press button and hold for 3s to initiate personalized setting
Set the individual setting e.g. MODE, SET TEMP or FAN SPEED and leave for 4s to save the
setting into the programme.
2 groups of settings are allowed to store in the handset. Press once to activate the P1 setting,
press again to cycle between P1 and P2.
Press any key to deactivate the personalize setting.
) –––: Auto
) button to activate the automatic air swing function.
) button to achieve the required set temperature in a short time.
) –––:
16