Select Language - Pitney Bowes DM200L Quick Install Manual

4
Step

Select Language

After the DM200L powers up and completes its
self-checks, the screen will prompt you to select
the language you wish to use. Simply press the
small round button next to your choice.
Select LANGUAGE
English
Espanol
5
Step
Set Local Time
After selecting a language, you have to set the correct
local time. The meter contains an internal clock with a
factory-set time, but that time may be incorrect for your
local time zone.
Key in Hours <0-12>
HH:
OK and Continue
If the hour value displayed (HH) is correct, simply select
OK and Continue. If the hour value is wrong, key in the
correct value before pressing
4
OK and Continue.
5
Step
Set Local Time (continued)
Key in Minutes
9:MM
OK and Continue
Again, if the current minutes value displayed (MM) is correct,
simply select OK and Continue. If the minutes value is wrong,
key in the correct value before pressing
Select AM or PM
9:25
AM
PM
Please be careful in selecting the AM or PM key.
ATTENTION
:
You MUST set the local time AM/PM correctly during the
installation process. If set incorrectly, your meter may print
the wrong date on your mail. In this case you must contact
Pitney Bowes Technical Support at 1-800-522-0020.
CURRENT LOCAL TIME
9:25 AM
This is correct
Adjust this time
Check one last time, paying particular attention to the
AM/PM setting. If the curent local time is correct, select
This is correct.
OK and Continue.
5