SMC Networks EZ Connect SMC8014WG-SI Install Manual page 26

7. The last 2 options are for Advanced Users, most users can leave this at the default
settings:
•
IR Replacement – Default Setting: Disable address replacement
•
Allow sessions initiated from/to the 3
8. When your configuration is complete, click the [Apply] button to save your changes and
return to the main Special Application page.
URL Blocking
This section allows you to control the content network. This feature is good for both business and
parents looking to control the content accessible from a web browser.
To access the URL Blocking configuration page, on the Side Navigation bar, click on [Firewall] link
and then click on the [URL Blocking] link.
To enable this option, click the [Enable Keyword Blocking] checkbox
To configure URL blocking, follow the steps outlined below:
1. On the Side Navigation bar, click on [Firewall] then select [URL Blocking]
2. Check the [Enable Keyword Blocking] checkbox to turn URL blocking on.
3. Enter in a new keyword or URL address that you want to block in the [Keyword/Domain
Name] input box.
4. Press the [Add Keyword] button to save this keyword or URL.
rd
host – Default Setting: unchecked
- 26 -