SMC Networks EZ Connect SMC8014WG-SI Install Manual page 15

•
Enable or Disable the integrated DHCP server
•
Configure the DHCP Lease time for your DHCP clients
To access the LAN configuration page, on the Side Navigation bar, click on [LAN] link.
LAN IP
Use the LAN section to configure the LAN IP address for the Gateway and to enable the DHCP
server for dynamic client address allocation. You can also configure the Lease Time for the DHCP
clients on your network.
Private LAN IP Settings
Define the Gateway's private LAN settings. The IP address configured here is the Gateway's
(default: 192.168.0.1).
NOTE: Port Forwarding and Access Control rules will be based on the network scope defined here.
If either of these types of rules were previously setup and the Private LAN IP address is changed,
then those rules will need to be recreated to reflect the new Private LAN IP network.
DHCP Server Settings
The Gateway's DHCP Server can be turned enabled/disabled here. Also the DHCP client Lease
Time can be adjusted from the default One Week setting. The Gateway functions as a DNS proxy
by default. DNS proxy can be disabled by configuring Primary and Secondary DNS values here,
which LAN DHCP clients will receive in their lease.
- 15 -