Kichler Lighting Industrial Fan Instruction Manual

Select™ ceiling fan

Advertisement

Quick Links

Kichler
®
Lighting
7711 East Pleasant Valley Road
P.O. Box 318010
Cleveland, Ohio 44131-8010
Customer Service
866.558.5706
8:30 AM to 5:00 PM EST,
Monday - Friday
Industrial Fan
Instruction Manual
A Kichler
®
Select
ceiling fan

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Industrial Fan and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kichler Lighting Industrial Fan

  • Page 1 Industrial Fan A Kichler ® Select ™ ceiling fan Kichler ® Lighting 7711 East Pleasant Valley Road P.O. Box 318010 Cleveland, Ohio 44131-8010 Instruction Manual Customer Service 866.558.5706 8:30 AM to 5:00 PM EST, Monday - Friday...
  • Page 2: Safety Rules

    1. SAFETY RULES 1. To reduce the risk of electric shock, insure 7. Avoid placing objects in the path of the electricity has been turned off at the circuit blades. breaker or fuse box before beginning. 8. To avoid personal injury or damage to the 2.
  • Page 3: Tools And Materials Required

    Industrial Fan 2. TOOLS AND MATERIALS REQUIRED Philips screw driver Blade screw driver 11 mm wrench Step ladder Wire cutters 3. PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: Fan blade/bracket assemblies (3) Canopy &...
  • Page 4: Mounting Options

    4. MOUNTING OPTIONS If there isn't an existing UL (cUL for Canadian Installation) listed mounting box, then read the following instructions. Disconnect the power by removing fuses or turning off circuit breakers. Secure the outlet box directly to the building structure.
  • Page 5: Hanging The Fan

    Industrial Fan 5. HANGING THE FAN REMEMBER to turn off the power before you Ceiling mounting bracket begin. To properly install your ceiling fan, follow the Canopy steps below. Step 1. Remove the decorative canopy bottom Canopy cover cover from the canopy by turning the cover Fig.
  • Page 6 Step 8. Slip the coupling cover, canopy cover and canopy onto the downrod. Cross pin Hanger ball Hanger ball Thread the hanger ball onto the downrod, insert the cross pin through the downrod and Downrod tighten. Now tighten the set screw. (Fig. 9) Canopy Step 9.
  • Page 7: Installation Of Safety Support

    Industrial Fan 6. INSTALLATION OF SAFETY SUPPORT (required for Canadian installation ONLY) A safety support cable is provided to help prevent the ceiling fan from falling. Ceiling mounting Attach bracket Step 1. Attach the provided wood screw and safety cable...
  • Page 8 Step 3. Connect the neutral fan (white) wire to Power lines 120v the neutral (white) household supply wire. (Fig. Green ground Step 4. Connect the fan ground wire (green) Wiring to the household ground wire (green or bare copper). Ground to mounting bracket B.
  • Page 9: Finishing The Installation

    Industrial Fan 8. FINISHING THE INSTALLATION Step 1. Tuck all the connections neatly into the ceiling outlet box. Outlet box Step 2. Slide the canopy up to the mounting Ceiling bracket and place one of the key hole slots mounting...
  • Page 10: Troubleshooting

    10. TROUBLESHOOTING Problem Solution Fan will not start. 1. Check that all fuses or circuit breakers are installed or in the ON position. 2. Check all electrical connections to insure proper contact. CAUTION: Make sure the main power is OFF when checking any electrical connection. Fan sounds noisy.

This manual is also suitable for:

Select

Table of Contents