Honda XR250 Tornado Owner's Manual page 104

Owner´s Manual
2. Press the UP/DOWN button to set the second digit.
Pressing and holding the UP/DOWN button will
change the meter reading continuously.
or
3. Press the ADJUST button. The first and the
one-tenth digits will begin to blink. Each time the
ADJUST button is pressed, the blinking digit will
alternate from the second digit to the first and
one-tenth digits or vice versa.
4. Press the UP/DOWN button to set the first and the
one-tenth digits.
or
5. Press the RESET-TRIP button. The whole mileage
will be preset.
• Press and hold the RESET-TRIP button for more than
1 second. The preset mileage will be displayed.
If the actual mileage exceeds the preset figure,
"999.9" km will be displayed and continue to decrease.
23