Features; (Not Required For Operation) Steering Lock; Helmet Holder - Honda XR250 Tornado Owner's Manual

Owner´s Manual

FEATURES

(Not required for operation)
Steering Lock
The steering can be locked when the ignition key (1) is
in the "LOCK" position.
To lock the steering, turn the handlebars all the way to
the left or right, turn the ignition key (1) to LOCK while
pushing in. Remove the key. To unlock the steering,
turn the key to OFF.
Do not turn the key to LOCK while riding the
motorcycle; loss of vehicle control will result.
To lock
(1)
(A)
(B)
(C)
To unlock
(1) Ignition key
(A) Push in
(B) Turn to LOCK
(C) Turn to OFF

Helmet Holder

The helmet holder (1) is on the left side below the left
side cover.
Insert the ignition key (2) and turn it counterclockwise
to unlock. Hang your helmet on the holder pin (3). Turn
the key clockwise to lock the holder and then remove
the key.
(3)
(2)
(1)
WARNING
!
Riding with a helmet attached to the holder can
interfere with the rear wheel or suspension and
could cause a crash in which you can be seriously
hurt or killed.
Use the helmet holder only while parked. Do not ride
with a helmet secured by the holder.
39
(1) Helmet holder
(2) Ignition key
(3) Holder hook